| | EDLINK18-Core | General (6 Items) |
| | | Device contact detailsMIB: SNMPv2-MIB
The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string. | 2026-10-31 16:00:10 | EDLINK18 Service Desk | | History |
| | | Device descriptionMIB: SNMPv2-MIB
A textual description of the entity. This value should
include the full name and version identification of the system's hardware type, software operating-system, and
networking software. | 2026-10-31 16:00:10 | EDLINK18-Core | | History |
| | | Device locationMIB: SNMPv2-MIB
The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string. | 2026-10-31 16:00:10 | EDLINK18 DataCenter | | History |
| | | Device nameMIB: SNMPv2-MIB
An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string. | 2026-10-31 16:00:10 | A1-8325-U25-Pri | | History |
| | | SNMP traps (fallback)Item is used to collect all SNMP traps unmatched by other snmptrap items | | | | History |
| | | System object IDMIB: SNMPv2-MIB
The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'. | 2026-10-31 16:00:10 | iso.3.6.1.4.1.47196.4.1.1.1.70 | | History |
| | EDLINK18-Core | Inventory (5 Items) |
| | | Chassis: Firmware versionMIB: ENTITY-MIB | 2026-10-31 16:00:10 | GL.01.08.0002 | | History |
| | | Chassis: Hardware model nameMIB: ENTITY-MIB | 2026-10-31 16:00:10 | Aruba 8325-32C 32p 100G Swch | | History |
| | | Chassis: Hardware serial numberMIB: ENTITY-MIB | 2026-10-31 16:00:10 | TW18KM302V | | History |
| | | Chassis: Hardware version(revision)MIB: ENTITY-MIB | 2026-10-31 16:00:10 | 1 | | History |
| | | Chassis: Operating systemMIB: ENTITY-MIB | 2026-10-31 16:00:10 | GL.10.09.1010 | | History |
| | EDLINK18-Core | Network Interfaces (displaying 1 to 39 of 522 Items) |
| | | Interface 1/1/1(Link1 Core1 to TOR3): Bits receivedMIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 20.8 Mbps | -581.31 Kbps | Graph |
| | | Interface 1/1/1(Link1 Core1 to TOR3): Bits sentMIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 175.09 Kbps | -12.08 Kbps | Graph |
| | | Interface 1/1/1(Link1 Core1 to TOR3): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/1(Link1 Core1 to TOR3): Inbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/1(Link1 Core1 to TOR3): Interface typeMIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention. | 2026-10-31 16:00:10 | ethernetCsmacd (6) | | Graph |
| | | Interface 1/1/1(Link1 Core1 to TOR3): Operational statusMIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. | 2026-10-31 16:44:06 | up (1) | | Graph |
| | | Interface 1/1/1(Link1 Core1 to TOR3): Outbound packets discardedMIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/1(Link1 Core1 to TOR3): Outbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/1(Link1 Core1 to TOR3): SpeedMIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. | 2026-10-31 16:40:11 | 100 Gbps | | Graph |
| | | Interface 1/1/2(): Bits receivedMIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 43.93 Mbps | -4.22 Mbps | Graph |
| | | Interface 1/1/2(): Bits sentMIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 126.42 Mbps | -7.09 Mbps | Graph |
| | | Interface 1/1/2(): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/2(): Inbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/2(): Interface typeMIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention. | 2026-10-31 16:00:10 | ethernetCsmacd (6) | | Graph |
| | | Interface 1/1/2(): Operational statusMIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. | 2026-10-31 16:44:06 | up (1) | | Graph |
| | | Interface 1/1/2(): Outbound packets discardedMIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/2(): Outbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/2(): SpeedMIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. | 2026-10-31 16:40:11 | 100 Gbps | | Graph |
| | | Interface 1/1/3(): Bits receivedMIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 68.38 Mbps | -4.99 Mbps | Graph |
| | | Interface 1/1/3(): Bits sentMIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 31.49 Mbps | +3.75 Mbps | Graph |
| | | Interface 1/1/3(): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/3(): Inbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/3(): Interface typeMIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention. | 2026-10-31 16:00:10 | ethernetCsmacd (6) | | Graph |
| | | Interface 1/1/3(): Operational statusMIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. | 2026-10-31 16:44:06 | up (1) | | Graph |
| | | Interface 1/1/3(): Outbound packets discardedMIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/3(): Outbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/3(): SpeedMIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. | 2026-10-31 16:40:11 | 100 Gbps | | Graph |
| | | Interface 1/1/4(): Bits receivedMIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 2.99 Kbps | -2.53 Kbps | Graph |
| | | Interface 1/1/4(): Bits sentMIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 41.73 Kbps | -10.18 Kbps | Graph |
| | | Interface 1/1/4(): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/4(): Inbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/4(): Interface typeMIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention. | 2026-10-31 16:00:10 | ethernetCsmacd (6) | | Graph |
| | | Interface 1/1/4(): Operational statusMIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. | 2026-10-31 16:44:06 | up (1) | | Graph |
| | | Interface 1/1/4(): Outbound packets discardedMIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/4(): Outbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |
| | | Interface 1/1/4(): SpeedMIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. | 2026-10-31 16:40:11 | 100 Gbps | | Graph |
| | | Interface 1/1/5(): Bits receivedMIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 0 bps | | Graph |
| | | Interface 1/1/5(): Bits sentMIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:42:11 | 0 bps | | Graph |
| | | Interface 1/1/5(): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-10-31 16:40:11 | 0 | | Graph |