| | A1-8360-U27 | Status (5 Items) |
| | | SNMP availability | 2026-03-05 07:17:51 | available (1) | | Graph |
| | | ICMP response time | 2026-03-05 07:18:01 | 0.2ms | -0.013ms | Graph |
| | | ICMP ping | 2026-03-05 07:18:01 | Up (1) | | Graph |
| | | ICMP loss | 2026-03-05 07:18:01 | 0 % | | Graph |
| | | Device uptimeMIB: SNMPv2-MIB
The time (in hundredths of a second) since the network management portion of the system was last re-initialized. | 2026-03-05 07:18:31 | 435 days, 19:11:04 | +00:01:30 | Graph |
| | A1-8360-U27 | Network Interfaces (displaying 1 to 45 of 352 Items) |
| | | Interface lag1(LACPUPLINK to CORES): SpeedMIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. | 2026-03-05 07:15:01 | 200 Gbps | | Graph |
| | | Interface lag1(LACPUPLINK to CORES): Outbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface lag1(LACPUPLINK to CORES): Outbound packets discardedMIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface lag1(LACPUPLINK to CORES): Operational statusMIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. | 2026-03-05 07:18:01 | up (1) | | Graph |
| | | Interface lag1(LACPUPLINK to CORES): Interface typeMIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention. | 2026-03-05 06:20:01 | ieee8023adLag (161) | | Graph |
| | | Interface lag1(LACPUPLINK to CORES): Inbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface lag1(LACPUPLINK to CORES): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface lag1(LACPUPLINK to CORES): Bits sentMIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:17:01 | 11.38 Mbps | +269.19 Kbps | Graph |
| | | Interface lag1(LACPUPLINK to CORES): Bits receivedMIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:17:01 | 64.53 Mbps | +10.45 Mbps | Graph |
| | | Interface eth0(): SpeedMIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. | 2026-03-05 07:15:01 | 0 bps | | Graph |
| | | Interface eth0(): Outbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface eth0(): Outbound packets discardedMIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface eth0(): Operational statusMIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. | 2026-03-05 07:18:01 | up (1) | | Graph |
| | | Interface eth0(): Interface typeMIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention. | 2026-03-05 06:20:01 | ethernetCsmacd (6) | | Graph |
| | | Interface eth0(): Inbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface eth0(): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface eth0(): Bits sentMIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:17:01 | 0 bps | | Graph |
| | | Interface eth0(): Bits receivedMIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:17:01 | 0 bps | | Graph |
| | | Interface 1/1/36(1st Link to Core1): SpeedMIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. | 2026-03-05 07:15:01 | 100 Gbps | | Graph |
| | | Interface 1/1/36(1st Link to Core1): Outbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/36(1st Link to Core1): Outbound packets discardedMIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/36(1st Link to Core1): Operational statusMIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. | 2026-03-05 07:18:01 | up (1) | | Graph |
| | | Interface 1/1/36(1st Link to Core1): Interface typeMIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention. | 2026-03-05 06:20:01 | ethernetCsmacd (6) | | Graph |
| | | Interface 1/1/36(1st Link to Core1): Inbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/36(1st Link to Core1): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/36(1st Link to Core1): Duplex statusMIB: EtherLike-MIB
The current mode of operation of the MAC
entity. 'unknown' indicates that the current
duplex mode could not be determined.
Management control of the duplex mode is
accomplished through the MAU MIB. When
an interface does not support autonegotiation,
or when autonegotiation is not enabled, the
duplex mode is controlled using
ifMauDefaultType. When autonegotiation is
supported and enabled, duplex mode is controlled
using ifMauAutoNegAdvertisedBits. In either
case, the currently operating duplex mode is
reflected both in this object and in ifMauType.
Note that this object provides redundant
information with ifMauType. Normally, redundant
objects are discouraged. However, in this
instance, it allows a management application to
determine the duplex status of an interface
without having to know every possible value of
ifMauType. This was felt to be sufficiently
valuable to justify the redundancy.
Reference: [IEEE 802.3 Std.], 30.3.1.1.32,aDuplexStatus. | 2026-03-05 07:15:01 | fullDuplex (3) | | Graph |
| | | Interface 1/1/36(1st Link to Core1): Bits sentMIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:17:01 | 4.93 Mbps | -228.09 Kbps | Graph |
| | | Interface 1/1/36(1st Link to Core1): Bits receivedMIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:17:01 | 11.73 Mbps | -124.43 Kbps | Graph |
| | | Interface 1/1/35(2nd Link to Core2): SpeedMIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. | 2026-03-05 07:15:01 | 100 Gbps | | Graph |
| | | Interface 1/1/35(2nd Link to Core2): Outbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/35(2nd Link to Core2): Outbound packets discardedMIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/35(2nd Link to Core2): Operational statusMIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. | 2026-03-05 07:18:01 | up (1) | | Graph |
| | | Interface 1/1/35(2nd Link to Core2): Interface typeMIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention. | 2026-03-05 06:20:01 | ethernetCsmacd (6) | | Graph |
| | | Interface 1/1/35(2nd Link to Core2): Inbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/35(2nd Link to Core2): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/35(2nd Link to Core2): Duplex statusMIB: EtherLike-MIB
The current mode of operation of the MAC
entity. 'unknown' indicates that the current
duplex mode could not be determined.
Management control of the duplex mode is
accomplished through the MAU MIB. When
an interface does not support autonegotiation,
or when autonegotiation is not enabled, the
duplex mode is controlled using
ifMauDefaultType. When autonegotiation is
supported and enabled, duplex mode is controlled
using ifMauAutoNegAdvertisedBits. In either
case, the currently operating duplex mode is
reflected both in this object and in ifMauType.
Note that this object provides redundant
information with ifMauType. Normally, redundant
objects are discouraged. However, in this
instance, it allows a management application to
determine the duplex status of an interface
without having to know every possible value of
ifMauType. This was felt to be sufficiently
valuable to justify the redundancy.
Reference: [IEEE 802.3 Std.], 30.3.1.1.32,aDuplexStatus. | 2026-03-05 07:15:01 | fullDuplex (3) | | Graph |
| | | Interface 1/1/35(2nd Link to Core2): Bits sentMIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:17:01 | 6.45 Mbps | +497.28 Kbps | Graph |
| | | Interface 1/1/35(2nd Link to Core2): Bits receivedMIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:17:01 | 52.79 Mbps | +10.57 Mbps | Graph |
| | | Interface 1/1/34(): SpeedMIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. | 2026-03-05 07:15:01 | 0 bps | | Graph |
| | | Interface 1/1/34(): Outbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/34(): Outbound packets discardedMIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/34(): Operational statusMIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. | 2026-03-05 07:18:01 | down (2) | | Graph |
| | | Interface 1/1/34(): Interface typeMIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention. | 2026-03-05 06:20:01 | ethernetCsmacd (6) | | Graph |
| | | Interface 1/1/34(): Inbound packets with errorsMIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |
| | | Interface 1/1/34(): Inbound packets discardedMIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime. | 2026-03-05 07:15:01 | 0 | | Graph |