Latest data

MIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

MIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention.

MIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

MIB: IF-MIB
The total number of octets received on the interface,including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),
through updating the syntax of the IANAifType textual convention.

MIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

MIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

FORTINET-FORTIGATE-MIB::fgSysSesCount

Number of active sessions on the device

MIB: SNMPv2-MIB
The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

FORTINET-FORTIGATE-MIB::fgSysUpTime

The 64bit time (in hundredths of a second) since the network management portion of the system was last re-initialized.

FORTINET-FORTIGATE-MIB::fgSysDiskCapacity

Total hard disk capacity (MB), if disk is present

FORTINET-FORTIGATE-MIB::fgSysDiskUsage

Current hard disk usage (MB), if disk is present

FORTINET-FORTIGATE-MIB::fgSysDiskUsage

Current hard disk usage (MB), if disk is present

FORTINET-FORTIGATE-MIB::fgVpnTunnelUpCount

The number of IPsec VPN tunnels with at least one SA

FORTINET-FORTIGATE-MIB::fgVpnSslStatsLoginUsers

The current number of users logged in through SSL-VPN tunnels in the virtual domain

FORTINET-FORTIGATE-MIB::fgVpnSslState

Whether SSL-VPN is enabled on this virtual domain

FORTINET-FORTIGATE-MIB::fgProcessorSysUsage

The processor's CPU system space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorSysUsage

The processor's CPU system space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorSysUsage

The processor's CPU system space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorSysUsage

The processor's CPU system space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorSysUsage

The processor's CPU system space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorSysUsage

The processor's CPU system space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorSysUsage

The processor's CPU system space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorSysUsage

The processor's CPU system space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorSysUsage

The processor's CPU system space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorUserUsage

The processor's CPU user space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorUserUsage

The processor's CPU user space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorUserUsage

The processor's CPU user space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorUserUsage

The processor's CPU user space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorUserUsage

The processor's CPU user space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).

FORTINET-FORTIGATE-MIB::fgProcessorUserUsage

The processor's CPU user space usage, which is an average
calculated over the last minute.
(only valid for processors types that support this statistic).